Wind Dancer LT Flag Stand
The Wind Dancer LT flag stand is a portable banner and flag pole display with adjustable height pole and hollow base that can be filled with water or sand for weight. This smaller version of the Wind Dancer was also designed as an outdoor flag and banner display, but is popular at indoor events and trade shows as well since the extra tall height allows the graphics to be seen over top of the competition.
The base of the Wind Dancer LT is hollow and can be weighted with water or sand. A telescopic aluminum support pole is attached to the base, and it adjusts up to 13.5' tall. A pivoting cross bar attaches to the top of the pole to support the banner via grommets along the top edge of the banner. Grommets down one side of the banner attach to the support poles to keep the banner or flag hanging straight for maximum visibility. Because this design allows the flag to pivot around the center support pole as the wind changes direction, the wind resistance is minimized and the display is able to stay stable in winds up to 18-24 mph.
Banner options for the Wind Dancer LT include a single sided fabric flag that can still be read from both sides since the printing shows through to the back side, but any type or logos will be reversed on the back. Double sided fabric and vinyl banners are also available where the print reads correctly from both sides.
The fabric banners are excellent for indoor use, or short term outdoor use, since they are printed using dye sublimation. The dye sublimation printing process produces vibrant color that becomes part of the fabric so it can't be scratched or washed off, but the down side is that dye inks do not have good fade resistance and have a prorated 3 month warranty against fading. Since this type of display is generally not left outdoors for long periods of time, the flags can last a long time, as the fading is caused by the amount of time they spend in the sun. For long term outdoor use, we recommend one of the vinyl banner options, as they are fade resistant for 2-3 years.
NOTE: Outdoor banner stands that have a water filled base can freeze in very cold weather and damage the base, so antifreeze can be added to the water to prevent this, or sand can be used instead of water to avoid this problem.
The Wind Dancer LT flag stand comes packed in two boxes. The Wind Dancer LT flag stand holds a 31.5" x 106.5" banner.
A two piece travel bag set can be found in the Related Products tab that helps keep all the parts of the Wind Dancer LT together when moving it from one event to another.
|Is a Featured Product
|Free Ground Shipping
Specs & Templates
Wind Dancer LT Specifications
- Banner width: 31.5"
- Banner height: 106.5"
- Overall display height: 162"
- Footprint: 26" x 26"
- Base volume: 11.5 gallons or 1.54 cubic feet
- Base weight filled with water: 110 lbs
- Base weight filled with sand: 150 lbs
- Shipping size, box 1: 27" x 27" x 11"
- Shipping size, box 2: 64" x 6" x 6"
- Shipping weight, box 1: 12 lbs
- Shipping weight, box 2: 11 lbs
- Total shipping weight, with banner: 28 lbs
- Warranty: 1 year
Graphic templates are available in pdf and eps formats. Click their icons to download them.
These templates provide a framework for designing your banner and show the live area as well as the leader portion of the banner that attaches to the banner stand and isn't visible when the stand is in use. If you would like a banner design, we offer those for a reasonable fee in the Banner Designs category.